← Wrivid News

Transport & Infrastructure

Duffy links FAA ground stop to router overload; fault remains under review

The transportation secretary said the router generated more than 1,000 connection attempts every four to five seconds. The FAA says the routine work was separate from its larger modernization program, and L3Harris says it is assisting the investigation.

By Wrivid News Desk
Archival file photo of air traffic controllers working at the Washington Air Route Traffic Control Center.
Archival file photo of air traffic controllers working at the Washington Air Route Traffic Control Center.File photo: U.S. Federal Aviation Administration / Wikimedia Commons (public domain) · file details · U.S. federal government work; public domain in the United States.

Executive summary

  • Duffy says a router flooded the network: Transportation Secretary Sean Duffy said a router involved in copper-to-fiber work began flooding other routers with more than 1,000 connection attempts every four to five seconds, disrupting aircraft communications and some radar feeds.[1]
  • Investigators have not identified the fault: Duffy said investigators had not determined whether an installation error or a faulty router caused the failure. DOT said 69% of copper communications had been replaced with fiber, while L3Harris separately reported more than 70% completion of its planned conversion; the statements do not say whether they use the same denominator.[1][2]
  • The instability reached multiple control centers: FAA Administrator Bryan Bedford said the communications instability affected as many as 17 of the country’s 22 regional air route control centers. An aviation expert told the Associated Press that shared links connect the centers and allow controllers to hand flights across regions.[3]
  • The FAA lifted the nationwide departure stop: The FAA said departures could resume Friday night after lifting a nationwide ground stop imposed over communications problems. The order began at 3:54 p.m. Eastern; its advisory listed an 11 p.m. Eastern event-window end.[4][5]
  • Airlines were still recovering Saturday: FlightAware counted more than 6,000 flights within, into or out of the United States canceled Saturday as airlines repositioned aircraft and crews, the Associated Press reported. The total was a Saturday snapshot, not a final count.[6]
  • Officials expected schedules to normalize by Sunday: Bedford said the U.S. air-travel schedule should return to normal by the end of Sunday. The FAA’s command center reported that all air route traffic control centers had returned to normal flight-plan intervals by 8 a.m. Eastern Saturday.[6][7]

Transportation Secretary Sean Duffy said Saturday that a router involved in routine copper-to-fiber work began flooding the Federal Aviation Administration’s network, contributing to communications and radar-feed disruptions that led to Friday’s nationwide ground stop. He said investigators had not determined whether an installation error or faulty equipment caused the router failure.[1]

Duffy said the router generated more than 1,000 connection attempts every four to five seconds and flooded other routers. The resulting communications problems affected pilots and some radar feeds, he said. The FAA halted departures nationwide as a safety measure while officials isolated the issue and restored systems.[1]

FAA Administrator Bryan Bedford said the instability affected as many as 17 of the country’s 22 regional air route control centers. A former FAA manager told the Associated Press that the centers hand flights between controllers as aircraft cross regions, so a failure in shared communications links can spread beyond the location where maintenance is underway.[3]

The Federal Aviation Administration lifted the nationwide ground stop Friday night, but airlines were still canceling thousands of flights the next day as they worked to put aircraft and crews back in position. FAA Administrator Bryan Bedford said Saturday he expected the U.S. schedule to return to normal by the end of Sunday.[4][6]

FlightAware counted more than 6,000 flights within, into or out of the United States canceled Saturday, the Associated Press reported. Airlines were still repositioning aircraft and crews, and Bedford said the schedule should return to normal by Sunday evening.[6]

The FAA issued its order at 3:54 p.m. Eastern, citing extraordinary circumstances and safety. The advisory said all airports were ground stopped and listed an event window through 11 p.m. Eastern, while instructing departures to remain grounded until further notice. The AP later reported that the FAA had lifted the order.[4][5]

At 3:54 p.m. Eastern, 4,042 flights bound for U.S. airports were already airborne, according to Flightradar24 data cited by Reuters. Aircraft already flying were allowed to continue to their destinations; the stop applied to departures.[8]

The Associated Press reported that Cirium counted at least 827 diversions by 7:05 p.m. Eastern. Of those, 670 flights returned to their original airport and 157 were redirected elsewhere. About 11,000 flights carrying more than 1.5 million passengers had been scheduled to depart U.S. airports after 4 p.m. Eastern.[9]

Reuters reported at 4:08 p.m. Eastern that FlightAware counted more than 1,000 cancellations and nearly 10,000 delays. That report’s earlier figures use different categories and timing from AP’s later Cirium diversion count.[8]

JetBlue said it canceled its remaining domestic flights Friday and expected additional cancellations Saturday. Air Canada canceled U.S. flights for the rest of Friday evening and warned that some itineraries using U.S. airspace could also be affected, the AP reported.[9]

International flights were handled case by case, and some flights within Alaska and Hawaii were not affected, according to the AP. Europe’s aviation agency suspended U.S.-bound departures at the FAA’s request from 5 p.m. Eastern until midnight; Mexico’s aviation authority said scheduled flights to the United States would remain grounded for the time being.[9]

The stop also reached cargo operators. FedEx said it was monitoring the situation and would activate contingency plans to limit service disruption, the AP reported.[9]

Duffy said L3Harris was doing routine maintenance at a remote FAA location, replacing legacy copper communications lines with fiber and changing a router. He described the transition as ordinary work that had been performed elsewhere for years, but said the router involved in the change flooded other routers with connection attempts. He said investigators had not determined whether an installation error or a faulty router caused the failure.[1]

Bedford said the maintenance was not part of the separate $12.5 billion modernization effort funded by Congress. He said the agency spends about $1 billion annually maintaining its existing 1980s-era telecommunications network and routinely replaces routers. Duffy said the transition schedule would be reevaluated after the outage. He also said DOT had replaced 69% of copper communications with fiber.[1]

L3Harris said it was working with the FAA and telecommunications partners to modernize airspace communications, that more than 70% of the planned copper-to-fiber conversion was complete, and that it was supporting the investigation. The company’s statement did not identify a cause or accept responsibility for the outage. The public statements do not specify whether the reported completion percentages use the same denominator.[2]

The FAA said its ground stop followed communications problems at several Air Route Traffic Control Centers. Its Saturday operations plan said all centers had returned to normal flight-plan intervals by 8 a.m. Eastern; the document did not identify a failed component or independently confirm Duffy’s router account.[5][7]

The stop was the first nationwide grounding since a 2023 failure in the FAA system that distributes preflight notices to pilots. That incident involved a different system. Duffy said officials did not believe Friday’s communications failure was caused by a cyberattack.[9][1]